WISP-in-a-Box LTE (Dual-WAN Sat-Cellular Gateway)

Description

Unbreakable Connectivity at the Edge

When you are operating heavy machinery, piloting heavy-lift drones beyond visual line of sight (BVLOS), or running an off-grid operations base, a drop in connection is more than an inconvenience—it is a critical failure point. Traditional mobile routers rely on single-carrier cellular lines, fragile consumer-grade Wi-Fi, and slow, software-delayed failovers.

The WISP-in-a-Box LTE (Gen 5) is engineered to eliminate connection latency. By combining high-performance multi-carrier cellular bonding with a Low Earth Orbit (LOE/Starlink) radio transceiver under the management of an onboard pfSense gateway, Product 2 delivers a robust, zero-downtime communication channel inside a single, weather-sealed, industrial-grade housing.

Advanced Hardware & Software Interlocks

1. The Sat-Cellular Combustion Engine (LTE + LOE)

The WISP-in-a-Box LTE integrates both an industrial, high-performance LTE compressor and an LOE satellite radio receiver directly onto a unified, high-durability internal motherboard. There are no external modems to dangle, no fragile plastic cases, and no loose connections. The unit automatically coordinates satellite data backhaul with multi-carrier cellular bonding, giving you the best of both worlds: high-throughput satellite speeds and the low-latency resilience of cellular mesh networks.

2. Sub-Millisecond pfSense Failover

Most commercial dual-WAN routers take 10 to 30 seconds to recognize a connection drop and switch WAN ports. If your Starlink dish’s line of sight is temporarily obstructed by heavy tree canopy, terrain, or building structures, those seconds of downtime will disconnect your drone, stop your automated ag-bots, or interrupt your secure telemetry feed. Our embedded pfSense routing layer evaluates connection health in real time, executing automated, sub-millisecond packet-level failover to the bonded cellular line with zero stream disruption.

3. The Battery-Free Nomad Shell

Like its predecessor, the Nomad Link, Product 2 has been completely purged of chemical batteries. It draws power directly from your vehicle or outpost’s 12V–48V DC bus via a fused hardwire whip. Powered by a high-efficiency DC-DC Buck Converter (Mini-360) and spoofed with our proprietary 10kΩ BSI resistor circuit, the system operates comfortably in unventilated greenhouses, engine compartments, and dashboards up to 60°C+ ambient.

4. Factory Application-Specific Pre-Configuration

Every WISP-in-a-Box LTE is custom-configured by DeReticular technicians at the workshop before shipping. When ordering, you specify your environment—whether it’s agricultural robotics, maritime mast arrays, or extreme overland vehicle command stations—and we pre-tune the pfSense routing configurations, vSIM profiles, and security keys to optimize performance out of the box.

---

Critical Mission Profiles

Heavy Lift Drones & Ag-Bots (BVLOS Telemetry)

Weight is the enemy of flight time, and Wi-Fi (2.4GHz) RF noise can interfere with sensitive radio control links on autonomous drones. By shedding the dead weight of the battery, Product 2 serves as lightweight flight avionics. Connecting directly to the flight controller via USB-C RNDIS (Tethering), it provides a hardline, shielded data pipe for Beyond Visual Line of Sight (BVLOS) telemetry without polluting the RF spectrum with wireless noise.

Marine Expedition & Offshore Operations (Mist & Salt Resilience)

Standard marine communications struggle with damp air, salt spray, and continuous pitch-and-roll connectivity dropouts. The WISP-in-a-Box LTE is protected by a weather-resistant, rugged polymer shell casing and sealed interior ports. Mounted high on a mast, it absorbs heavy physical impacts and continuously failovers to bonded shore-based cellular towers whenever ocean swells block the satellite dish’s horizon profile.

---

Technical Specifications

• Connectivity: Dual-WAN (Bonded 4G LTE CAT 6 + LEO Starlink Radio Transceiver)
• LTE Speeds: 300 Mbps Down / 50 Mbps Up (vSIM primary, covers 140+ countries)
• Primary OS: Embedded pfSense with sub-millisecond WAN failover
• Input Voltage: 12V DC to 48V DC via included hardwire whip (fused, 3ft)
• Data Interfaces: Shielded USB-C Tethering (RNDIS) and Gigabit Ethernet ports
• Operating Temperature: -10°C to 60°C (Enclosure Limited)
• SIM Slots: vSIM (Primary) + Physical Nano-SIM (Backup)

---

What’s In The Box?

• 1x WISP-in-a-Box LTE Gateway (Nomad Shell Casing)
• 1x Fused Hardwire Power Whip (3ft)
• 1x Shielded High-Speed USB-C Data Cable (1ft)
• 1x Custom Application Configuration Profile Card
• 1x Quick Start Guide (“DO NOT INSERT BATTERY” Warn-Card)

---

WARRANTY & COMPLIANCE WARNING: This product has been modified by DeReticular. The original manufacturer warranty is void. DeReticular provides a sovereign 90-Day “Works or We Replace It” warranty on our modification only. Modifying internal power sources does not typically void FCC ID status unless RF noise is introduced; high-quality, shielded DC-DC buck converters are utilized to maintain strict FCC compliance.