Description
Energy Wasted is Money Burned.
In an “Island Mode” setup—whether a remote farm or a clinic in Uganda—full batteries mean wasted solar potential. If your inverter clips production because the battery is at 100%, you are throwing free energy away.
The Industrial Foreman fixes this. It is an agent that lives on your Sovereign Sentry, talks directly to your hardware via Serial/Modbus, and acts faster than a human operator ever could.
Two Modes, One Agent.
Mode A: The Grid Balancer (Stationary)
Designed for Sovereign Sentry (Standard) connected to Solar Inverters.
- The Logic: The agent monitors your battery state-of-charge (SoC) and the local weather forecast via API.
- The Scenario: “Battery is at 98%. Solar input is high. Forecast is clear.”
- The Action: The agent triggers a smart relay (via GPIO or Wi-Fi) to “dump” excess power into a secondary load—heating a water tank, running a pump, or spinning up a crypto-mining job on the Sentry Pro.
- The Result: 100% Energy Utilization. Zero waste.
Mode B: The Supply Chain Diplomat (Mobile)
Designed for Nomad Fleet Kit installed in a vehicle.
- The Logic: The agent monitors the Nomad Link’s GPS stream against a pre-defined “Geo-Fence.”
- The Scenario: Your truck crosses the 5km perimeter of a border crossing or a depot.
- The Action: The agent automatically compiles the load manifest, cryptographically signs it with the driver’s Sovereign Key, and emails the PDF to the Customs Broker or Depot Manager.
- The Result: Zero wait time. The paperwork arrives before the truck does.
The “Physical Bridge” (Hardware Included)
Software is useless if it can’t talk to the machine. That’s why The Industrial Foreman ships with a physical Industrial USB-to-RS485 Adapter. This shielded cable allows your Sentry Node to plug directly into the data ports of industrial inverters (Victron, Growatt, SMA) and legacy PLCs.
Technical Specifications
| Component | Requirement |
| Hardware Requirement | Sovereign Sentry (Standard) for Grid Mode. Nomad Fleet Kit for Logistics Mode. |
| Protocol Support | Modbus RTU (RS485), CAN Bus (via adapter), MQTT, HTTP Webhooks. |
| Logic Engine | Node-RED flow integrated into the OpenClaw Agent container. |
| Included Hardware | 1x USB-to-RS485 Serial Converter (FTDI Chipset, Shielded, Terminal Block). |
| Integrations | Victron VRM, OpenWeatherMap API, Traccar (GPS), Telegram. |
Use Case Scenarios
The Smart Farm (Irrigation Control)
You want to water crops only when evaporation is low.
- Trigger: The agent checks the soil moisture sensor (LoRaWAN via Mesh Beacon) and the local humidity.
- Action: If moisture < 30% and Humidity > 60% (Night), it triggers the pump relay.
- Report: “Irrigation Cycle Complete. 500 Gallons dispensed.”
The Cold Chain (Temperature Audit)
You are transporting wagyu beef. The fridge must stay below -4°C.
- Trigger: The Nomad Link sensors detect the fridge temp rising to -2°C.
- Action: The agent blasts a high-priority WhatsApp alert to the driver and the dispatcher: “CRITICAL: Fridge Temp Rising. Check Compressor.”
The “Dump Load” Miner
You have free solar power at noon.
- Trigger: Battery full.
- Action: The agent wakes up a background mining process on the Sentry Pro to convert that excess electricity into Locutus Credits.
What’s In The Box?
- Digital License: Access to the dereticular/industrial-foreman Docker image.
- Hardware: 1x USB-to-RS485 Industrial Adapter Cable (6ft).
- The Library: Pre-configured Node-RED flows for common inverters (Victron, Growatt) and GPS trackers.
Licensing
- Type: Perpetual Commercial License.
- Seats: Single Node License.
- Updates: 1 Year of Protocol Updates included (new inverter definitions, etc.).
